Here we go! XXDLI3 OTA firmware got leaked earlier today and we have the lowdown. The firmware may have bugs so install at your own risk.
Details for the XXDLI3 are below:
Base Firmware: I9300XXDLI3 (4.1.1)
Country: United Kingdom
Build Date: 5th September 2012
Note: Make sure to backup all your data beforehand.
Download XXDLI3 OTA Firmware from here.
Step 1. Download XXDLI3 OTA from the link above.
Step 2. Mount your Galaxy S III to your PC via USB cable.
Step 3. Transfer the firmware file to your SD card’s root.
Step 4. Turn off your phone and disconnect your Galaxy S III from your PC after the transfer is complete.
Step 5. Boot into Recovery Mode by pressing Volume Up + Home + Power buttons at a time.
Step 6. Navigate to apply update from SD card using the volume buttons. Press power to confirm your selection.
Step 7. Press the power button again to select a file.
Step 8. Select the XXDLI3 OTA firmware file which we transferred earlier. Press power to select the file and confirm the selection.
Step 9. Finally after the installation is complete select the reboot now option.
Your Galaxy S III will now boot into XXDLI3 OTA firmware. The initial boot will take around 5 minutes so don’t worry.
Also check out:
- How To Install Galaxy S III I9300 XXDLI3 Android 4.1.1 Jelly Bean Firmware
- How to Root Galaxy S III I9300 Running XXDLI3 Android 4.1.1 Jelly Bean
Feel free to ask us any questions in the comments below.