A few weeks ago Samsung released the UBBLJ1 firmware update for Galaxy Tab 10.1. Today another firmware has been released. The JPLPC firmware updates Galaxy Tab 10.1 to Android 4.0.4. It’s for the 3G + WiFi version and is released for the Arabic region. Follow the guide below to get it on your tablet.
JPLPC Firmware Details
- PDA: P7500JPLPC
- CSC: P7500OJPLP8
- Version: 4.0.4
- Date: 2012-11-02
- Regions: Arabic
Before proceeding make sure all your data is backed up. Also make sure your tablet is fully charged. Do note that as with any firmware flashing, there is always a certain amount of risk involved. So proceed at your own risk.
Step1- Download the JPLPC firmware
Step 2- Download ODIN
Step 3- Boot your tablet into download mode. Do this by switching it off and then pressing and holding the Volume Down + Home buttons together, and then pressing the Power button. You’ll see a triangle and an Android logo. Press the power button to enter download mode
Step 4- Open ODIN on your PC. Make sure USB drivers for the tablet are installed. Upon successful connection one of the ID:COM boxes will turn yellow with the COM port number.
Step 5- Select all files you downloaded in step 1.
- Click the PDA button. Select the file which has CODE in its name
- Click the Phone button and select the file which has MODEM in its name
- Click on the CSC button and select the file which has CSC in its name
- Click the PIT button and select the .pit file. Ignore this step if this file doesn’t exist
Step 6- In ODIN select Auto Reboot and F. Reset Time options. Select repartition only if your selected the PIT file
Step 7- Click the start button. Installation process will take a few minutes. After that your tablet will reboot with JPLPC Android 4.0.4 official firmware