XXDLI6 Android 4.1.1 Jelly Bean Firmware for the Galaxy S III I9300 has been leaked and were nearing the final release which we expect will be XXDLI11. The release is still in Beta unfortunately so it may have some problems.
Details of the XXDLI6 firmware are below:
PDA: I9300XXDLI6
CSC: I9300OXADLI6
Version: 4.1.1
Date: 2012-09-13
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
Download the ROM from here.
Now on to the tutorial itself, just following the steps below to install XXDLI6 Firmware on your Galaxy S III I9300.
Note: Make sure to backup all your data beforehand as this tutorial will wipe all your data along with your root.
You can follow this guide to Root Galaxy S III I9300 Running XXDLI6.
Step 1. Download the ROM from the link given above.
Step 2. Download Odin 1.85 from here.
Step 3. Go into Download mode by pressing Volume Down + Home buttons at the same time, and then press the Power button when the Android icon appears. Press the power again to go into Download mode.
Step 4. Open Odin which you download from the link above and connect your phone via USB cable.
Step 5. Press on the:
– PDA button in Odin and select the CODE file.
– Phone button and select the MODEM file.
– CSC button and select the CSC file.
– PIT button and select the PIT file.
You’ll find these files in the ROM linked at the start of this tutorial. If there are no files of the type in the folder then ignore them.
Step 6. Check the Auto Reboot F.Reset Time check boxes. Also make sure to check the Re-Partition option but only if you’ve selected a PIT file in Step 5.
Step 7. Click the Start button. The procedure should take a couple of minutes at most.
Step 8. After the installation is done your phone should restart and boot into the home screen. Disconnect the phone from your computer and turn it off again.
Step 9. Now press Volume Up + Home + Power to navigate into the recovery menu.
Step 10. Using the volume buttons to navigate select the wipe data/factory reset option.
Step 11. Now finally select reboot phone.
And that’s it! Your Galaxy S III should boot into the latest XXDLI6 firmware with Android 4.1.1 Jelly Bean. If you have any questions or problems feel free to ask us in the comments below.