techdeville.com

Tag: jailbreak

  • Jailbreak iOS 6.0.1 tethered on iPhone and iPod using Redsn0w

    Jailbreak iOS 6.0.1 using this easy guide. Apple update the iOS software to 6.0.1 yesterday to fix some minor bugs. Unfortunately as it has always been, with each new version of iOS, the jailbreak process has to be redone every time.

    Fortunately iOS 6.0.1 can now be jailbroken. Unfortunately it is currently only for iDevices that run the A4 or lower chipset. That means iPhone 4S, iPhone 5, new iPod Touch and iPad are out ( any device with A5, A5X, A6 or A6X). Furthermore this jailbreak is tethered which means every time you reboot your device you’ll need to connect it to your PC or Mac.

    jailbreak1 Jailbreak iOS 6.0.1 tethered on iPhone and iPod using Redsn0w

    Follow the steps below to Jailbreak iOS 6.0.1.

    Step 1- Update your device to iOS 6.0.1

    Step 2- Download iOS 6.0 from the links below:

    Step 3- Download Redsn0w for Mac or Windows

    Step 4- Open Redsn0w and click on Extras –> Select IPSW. Select the firmware you downloaded in step 2. After it has been identified by Redsn0w click the back button to go back to the main screen

    Step 5- Click jailbreak and select Cydia. Follow the instructions to put your device into DFU mode. After the jailbreak is done click “Autoboot this device when it connects in DFU mode” which will put your device in tethered mode

    That’s it. After you’re done with step 5 your device will be jailbroken.

  • How to jailbreak iOS 6 on iPhone or iPod touch using RedSn0w [tethered]

    Do you want to take control of your iOS device by performing a jailbreak on it and then tell your Android using friends on their face that you can also customize your Apple device just as you want? Use the guide below to Jailbreak iOS 6 devices.

    Well if you want to then you just need to follow a few simple steps and to achieve this goal. Here in this post we are going to show you how you can jailbreak your iPhone or iPod touch using RedSn0w tool. The process is quite easy and takes a few minutes to complete, however you should follow the instructions very carefully and back up your data through iTunes before proceeding.

    Before you go any further in this process, please note that if you have any iOS device other than iPhone 4, iPhone 3GS, and iPod touch 4th generation please do not use this method as your device isn’t supported yet. Also, this is a tethered jailbreak that means you will have to connect your device to RedSn0w every time it restarts. We will tell you how to do that at the end of the post.

    What you need:

    You will need to download the latest iOS version which is iOS 6 for your device if you aren’t already using it. You can find the direct download links below.

      • iPhone 3GS (iPhone2,1) version 6.0 (Build 10A403), Download
      • iPhone 4 (iPhone3,1) version 6.0 (Build 10A403), Download
      • iPod Touch 4G (iPod4,1) version 6.0 (Build 10A403), Download
      • iPhone 4 (Verizon) (iPhone3,3) version 6.0 (Build 10A403), Download

    You will also need the RedSn0w tool in order to jailbreak your device. Download it from here (Windows/Mac).

    Let’s begin.

    Step 1. Connect your iPhone or iPod touch to your computer and open iTunes.

    Step 2. From iTunes click on the name of your iOS device from side pane. On the details page of your device you will see the restore button. Click on it while pressing the Option key on Mac or the Shift key on Windows.

    Step 3. From the window that will open on your screen search for the IPSW firmware file you just downloaded and click on the ‘Open’ button.

    Step 4. After your device is running iOS 6, close iTunes and open RedSn0w. (Windows users should open it in Administrative mode)

    redsn0w How to jailbreak iOS 6 on iPhone or iPod touch using RedSn0w [tethered]

    Step 5. Once your device shows up on RedSn0w click on the ‘Extras’ button and then on ‘Select IPSW’ button. Then from the window select the firmware file you downloaded earlier (same on that you used on iTunes).

    Step 6. After selecting IPSW, go back and click on the ‘Jailbreak’ button. Turn your device off and click on the next button.

    Step 7. Follow the instructions on your screen very carefully. After you have successfully put your iOS device into DFU mode, the jailbreak process on your it will start. Wait for it to complete as it will take 2-3 minutes.

    redsn0w 2 How to jailbreak iOS 6 on iPhone or iPod touch using RedSn0w [tethered]

    Step 8: After your device is ‘exploited’ RedSn0w will show a window, tick mark ‘Install Cydia’ from there and click next.

    redsn0w 3 How to jailbreak iOS 6 on iPhone or iPod touch using RedSn0w [tethered]

    Step 9. Your iOS device will start and will have the Cydia icon on the springboard, and you will see ‘Jailbreak complete’ notification on your computer. You will not be able to open it as it will crash, do not panic and follow step 10 and onwards to solve this problem.

    Booting tethered

    Step 10. Connect your iOS device to your computer if it isn’t connected already, and open RedSn0w.

    Step 11. Click on the Extras button and then on ‘Just Boot’ button. Turn off your device and follow the on screen instructions.

    That’s it! Enjoy your freedom.

  • How To Restore Your Unlock Ticket For SAM Unlock

    The following tutorial will teach you how to restore your SAM Unlock ticket you backed up either using RedSn0w or iFile method. The full guide is below.

    Step 1. Insert your original SIM into your iPhone but make sure to disable SAM from the Sam Prefs before doing so.

    Step 2. Email yourself the Lockdown.ZIP archive if you don’t have it on your phone, if you then skip the first part of this step and open the archive using iFile.

    Step 3. iFile will ask you whether you would look to use the ZIP viewer or Unarchive it. Select the latter which will give you the Lockdown folder you archived earlier.

    Step 4. Now use the Copy/Link function of the Clipboard (Icon at the bottom right corner).

    Step 5. Now navigate to /var/root/Library by going all the way back and going into the root and Library folders.

    Step 6. Tap on the edit button on the top right and put the Lockdown folder in the trash.

    Step 7. Tap on the Clipboard icon again and Paste the extracted Lockdown folder here.

    Step 8. Tap on done, go all the way back to the Home screen and continue to Reboot your device.

    After your device has rebooted into the Springboard it will pick up your SAM unlocked SIM of your choice.

    Stay tuned to TechDeville for everything Tech! Follow us on Twitter (@TechDeville), add us to your Google+ circles and like us on Facebook.

    Incoming search terms:

    • i cant restore the unlock ticket
    • lockdown zip
    • sam lockdown
    • SAM lockdown zip
    • sam unlock april 28
    • where is the sam unlock ticket

  • How To Backup Your iPhone Unlock Ticket Using RedSn0w

    After unlocking your iPhone using the SAM Unlock method detailed here you should definitely backup the Unlock Ticket. You can do so very easily using the popular Jailbreaking tool – RedSn0w. Just in case you don’t have a compatible PC lying around use this method to backup your Unlock Ticket.

    The full guide is below:

    Step 1. Download and install the latest version of RedSn0w.

    Step 2. Launch the application.

    Step 3. Choose the Extras option.

    Step 4. Now choose Even More.

    Step 5. Now choose the Backup option, it should be last one.

    Step 6. Make sure your Backup path is as follows: /var/root/Library/Lockdown.

    Step 7. Now plugin your iPhone to your computer through a USB cable. Note: If you manage to get a Backup failed error message then you have to install the afc2add package from the System section of Cydia on your phone.

    After the Lockdown folder is all safe and archived copy it to somewhere safe. If you have any further questions feel free to ask us in the comments below.

    Stay tuned to TechDeville for everything Tech! Follow us on Twitter (@TechDeville), add us to your Google+ circles and like us on Facebook.

    Incoming search terms:

    • afc2add iphone
    • how to use my backup from redsn0w

  • iOS 5 Beta 6 Jailbreak is Possible Using Redsnow 0.98b5

    iDB and various sources have confirmed that iOS 5 Beta 6 Jailbreak is possible on the iPhone, iPod Touch or iPad using Redsnow 0.98b5 or Snowbreeze.

    The process should be the same as previous versions of Redsn0w and Sn0wbreeze. Just use the new beta 6 firmware file in place of beta 5 or earlier.

    Open up the full article for the complete guide on how to jailbreak iOS 5 Beta 6 using Redsn0w.

    Guide Here

     

    UPDATE: The jailbreak is causing issues on some devices, proceed at your own risk or wait for the guide to get updated with updated tools.

    NOTE: If you’ve alreay updated and are facing problems like the recovery mode loop, visit this guide HERE to downgrade to a stable release.

    Incoming search terms:

    • redsnow 0 98b5
    • redsnow 0 98
    • redsnow 98b5
    • redsnow 0 98b5 download
    • redsnow 0 98b6 download
    • 98 redsnow
    • redsn0w win 98b5
    • red snow 0 98
    • ipad 2 redsn0w 0 98b6 untethered jailbreak
    • download redsnow 98b5

  • How To: Jailbreak iOS 5 Beta 7 on iPhone 4/3GS, iPod Touch and iPad Using Redsnow

    The following are instructions on How To Jailbreak iOS 5 Beta 7 on iPhone 4/3GS, iPod Touch and iPad using Redsn0w 0.98b7.

    The complete guide after the break.

    NOTE: If you’ve already updated and are facing problems like the recovery mode loop, visit this guide HERE to downgrade to a stable release.

    Tools You’ll Need:

    iOS5 Beta 7 Firmware File. Click Here.

    Redsn0w 0.98b7. Click Here.

    iOS 5 Beta 6 Firmware File.

    Step One

    Download the official IPSW (Depending on your device). Download and extract Redsn0w. For convenience, place all of them in a folder on the desktop.

    Step Two

    Connect your iPhone to the computer and launch iTunes. When the phone shows up in iTunes select it from the list of devices on the left.  Now hold down Shift and press the restore button. You can also choose to update but restore is recommended; it’s always better to get a fresh start.

    Step Three

    As soon as you press Shift+Restore, a window will pop up asking you to select the IPSW file to be used. Point it towards the Official 5.0 Beta 7 IPSW you placed in the Jailbreak folder on the desktop.

    Step Four

    Once iTunes has successfully flashed your phone to the desired firmware, navigate to the Jailbreak folder on the desktop and launch Redsn0w.exe.

    **Windows 7 users may need to run RedSn0w in Vista compatibility mode. You can do this by right clicking the executable and selecting Properties from the contextual menu

    Once redsn0w opens, click the browse button.

    Step Five

    A windows will pop up asking you to select the Official IPSW file for your desired firmware. Point it towards the Official 5.0 Beta 6 IPSW you placed in the Jailbreak folder on the desktop.

    You will then be asked (if using a 3GS) if your device is a newer “fixed” model. If your’s is, then press the Yes button, click the No button otherwise. If you aren’t sure then simply press the Yes button.

    Step Six

    Once the firmware has been successfully identified click Next. Redsn0w will then prepare the jailbreak data.

    After the data has been prepared you will be shown a menu where you can select different jailbreak options. You may select specific options depending on your needs, but for now we will only select “Install Cydia”. Select that option and then hit next to continue.

    Step Seven

    Connect the iPhone to the PC and then proceed to switch it off. Once the phone is fully turned off click Next. Remember to hold the phone in your hand before you press next  as you will have to press various buttons on the phone to make it  enter DFU mode.

    Step Eight

    After pressing next, instructions to enter DFU mode will appear. To enter DFU mode, hold the power button for 3 seconds, then without letting go of the power button press the home button and power button together for 10 seconds after which let go of the power button and continue to hold the home button until your PC detects the phone. It may take several tries to get into DFU mode.

    Once the phone has entered DFU mode, the process will begin. The phone will reboot.

    When it’s completed it will show you this message. The phone will then reboot and the rest of the process will continue on your device.

    Once your iPhone is done being jailbroken, you should see Cydia on your SpringBoard. This means the jailbreak has been carried out successfully. Congratulations on jailbreaking your iPhone 4/iPhone 3GS tethered on the iOS 5 beta 5 firmware.

    NOTE: How to boot tethered jailbroken iPhone 4/iPhone 3GS after reboot, launch RedSn0w and select “Just boot tethered right now”.

    Kindly “+1″ and “like” the article if this helps you out. Thanks!

    Stay tuned to TechDeville for everything Tech! Follow us on Twitter (@TechDeville) and like us at Facebook.

    Incoming search terms:

    • redsn0w 0 98b7 download
    • redsn0w 0 98b7
    • the rest of process taken place on your device iphone redsnow
    • redsnow o 98b7 for iphone 3gs
    • can i jailbreak newer fixed model
    • this newer (fixed) model of iphone 3gs
    • the rest of this process takens place on your device
    • redsnow jailbreak 0 98b7
    • reds0w beta 4 is this a newer (fixed) model
    • newer fixed model 3gs ios 5 jailbreak

  • How To: Downgrade from iOS 5 Beta 8 to 4.3.3 or 4.3.5 in iPhone, iPod Touch or iPad

    The following is guide on how to downgrade your iPhone, iPod Touch or iPad on iOS 5.0 Beta 8  back to iOS4.3.3 or iOS 4.3.5.

    The complete guide after the break

    Tools you’ll need:

    The latest iTunes.

    iPhone 3GS iOS4.3.3 Firmware File. Click here.

    iPhone 4 iOS4.3.3 Firmware File. Click here.

    iPad iOS4.3.3 Firmware File. Click here

    iPod Touch 3G iOS4.3.3 Firmware File. Click here.

    iPod Touch 4G iOS4.3.3 Firmware File. Click here.

    TinyUmbrella. Click here.

    Recboot(Mac). Click here

    Recboot(Windows) – Requires Dotnet 4.0. Click here

     

    Step One

    Download the respective firmware file for your iDevice and place it on the desktop.

    Run TinyUmbrella and click on the “Start TSS Server” Button.

    NOTE – If you are downgrading to 4.3.5, skip the above step.

    Connect you iDevice to your PC and place it into DFU mode. To place your device into DFU mode:

    1.  Turn your device off.

    2. Hold the power button for Three seconds

    3. Without letting go of the power button,  press the home button. Keep them pressed for 10 seconds.

    4. Let go of the power button and hold the home button until your PC detects the phone. It takes upto 30 seconds.

    It may take several tries to get your phone into DFU mode.

    Step Two

    Open up iTunes. If you get the following message, then it means that you’ve successfully placed your device into DFU mode.

    On the iPhone menu in iTunes, hold shift and press the restore button.

    iTunes will now ask you to locate the IPSW file. Point it towards the firmware file which you downloaded and placed on the desktop.

    iTunes will then restore your iPhone with the  firmware. This process will take about ten minutes and iTunes will notify you once the process is complete. The phone will then restart.

    Step Three

    After the restore,  if you encounter an error like 1011, 1013, 1015 ; just ignore them (the firmware has actually been successfully installed). You just have to kick your phone out of recovery mode. To do this open up recboot-which you downloaded above. Once it loads up, press the exit recovery button and it will kick your phone out of recovery mode. The phone will then reboot and you will be booted into iOS 4.3.3.

    Update: If you are getting this error

    Follow THIS guide.

    Kindly “+1″ and “like” the article if this helps you out. Thanks!

    Stay tuned to TechDeville for everything Tech! Follow us on Twitter (@TechDeville) and like us at Facebook/

    Incoming search terms:

    • Download iPad 2 iOS4 3 3 firmware
    • downgrad ipod touch 4G from iOS5 1 to iOS4 3 3
    • ipad2 2 4 3 3 tinyumbrella
    • iphone 3g ios4 3 3 firmware

  • Add some color and cuteness to your iDevice with Nyan Sliders

    Are you tired of your dull grey mercury colored sliders for controlling the music volume and the time bar? What if you add a little more life to it by bringing in some Nyan to it? Including the rainbow trail and even an animated Nyan Cat with moving feet and face? Follow this simple guide and your iDevice will be “nyan”ty nine percent cooler.

    Step 1.

    Open Cydia on your iDevice and navigate to search.

    Step 2.

    In search type “org.thebigboss.nyansliders” without the quotation marks and look for the icon in the image below (its nyan cat) and tap it.

    Step 3.

    Choose “Install” from the top right of the screen after tapping the cat and after install press “Confirm”.

    Step 4.

    Wait for the tweak to download and install and tap on “Restart Springboard” for a soft reset on your iDevice.

    Step 5.

    Navigate to your “Settings” and slide down till you see “NyanSliders” as shown in the image below, and then customize it to your liking.


    Step 6.

    Your iDevice is now NYANty nine percent more cooler as shown in the images below.

    Stay tuned to TechDeville for everything Tech! Follow us on Twitter (@TechDeville) and like us at Facebook.

    Incoming search terms:

    • nyan cat rainbow trail
    • color slider cydia
    • status bar rainbow cydia
    • rainbow trail ios review
    • NyanSliders deb ios 5
    • nyan sliders on ios 5 0 1?
    • nyan slider iPad jailbreak
    • jailbreak rainbow slide
    • ios5 tweak status bar color
    • ios5 statusbar rainbow cydia tweak

  • Top 10 Best iPad 2 Cydia Jailbreak Tweaks, Apps And Utilities

    The iPad is one of Apple’s best devices yet and with the 2nd iteration it’s better than ever. The iPad is now everywhere, in schools, colleges, homes, hospitals and it’s only gonna get bigger. Considered the best tablet by the iPad 2 is capable of a lot of neat features but if you really want to juice out everything from your purchase you’re gonna have to Jailbreak it. Check out the Top 10 Best iPad 2 Cydia Jailbreak Tweaks, Apps And Utilities in the list after the break.

    10. PkgBackup – $7.99

    This handy application priced at $7.99 allows you to backup all your downloaded jailbreak stuff and re-downloaded it later.

    9. PDF Patcher 2 – Free

    The 2nd iteration of PDF Patcher helps patch security holes in iOS. People can use these security holes to install malicious content if you’re not careful.

    8. PhoneITiPad – $20

    This neat app allows you to turn your iPad 2 into an iPhone, you can make calls and everything else you can on an iPhone. Just make sure you have a 3G iPad as you will be needing a SIM card.

    7. LockInfo – $7.99

    LockInfo allows you to customize your iOS lockscreen like many Android phones. You can add widgets, shortcuts and apps to your lockscreen so you get work done faster.

    6. iFile – $4

    iFile is a handy file manager which allows you to access any file on your iPad 2. iFile will also be required to install many Jailbreak tweaks and utilities so it’s a must buy for us!

    5. RetinaPad – Free

    RetinaPad allows you to perfectly upscale apps optimized for the iPhone and iPod Touch. Without this tweak you would usually have to use those apps in their “smaller form” or have to blow them up to fill the screen which would make it very pixelated.

    4. GridLock – $0.99

    GridLock allows you to disable springboard restrictions and allows you to arrange your apps any way you want.

    3. InfiniFolders – $1.99

    InfiniFolders allows you to remove iOS’ limit of only being able to store 12 apps in one folder.

    2. Winterboard

    Winterboard completely changes your iPad 2′s look, you can download and use custom themes and even make some of our own.

    1. SB Settings

    SB Settings are the master controls for your iPad 2, it also allows your to have a quicker access to WiFi, Bluetooth and other toggles which would save you a lot of time.

    Stay tuned to TechDeville for everything Tech! Follow us on Twitter (@TechDeville) and like us at Facebook.

    Incoming search terms:

    • best ipad 2 cydia tweaks
    • best ipad 2 cydia
    • top 10 cydia ipad 2
    • TOP IPAD 2 CYDIA APPS
    • best ipad tweaks
    • top ipad 2 jailbreak tweaks
    • best ipad 2 tweaks
    • ipad 2 ifile create shortcut on ipad
    • best cydia utilities
    • cydia tweak ipad 2