We covered the XWLQ3 firmware update for Galaxy S II a few days back. Samsung has now released another firmware for a different region. The BHLPA firmware updates Galaxy S II to Android 4.0.4. Follow the guide below to get this update on your smartphone.
BHLPA Firmware Details
- PDA: I9100BHLPA
- CSC: I9100XEGLPC
- Date: 2012-11-16
Before proceeding make sure all your data is backed up. Also make sure your tablet/phone is fully charged. Do note that as with any firmware flashing, there is always a certain amount of risk involved. So proceed at your own risk.
Step1- Download the BHLPA firmware
Step 2- Download ODIN and make sure your USB drivers are installed
Step 3- Boot your phone into download mode. Do this by switching it off and then pressing and holding the Volume Down + Home buttons together, and then pressing the Power button. You’ll see a triangle and an Android logo. Press the power button to enter download mode
Step 4- Open ODIN on your PC. Make sure USB drivers for the phone are installed. Upon successful connection one of the ID:COM boxes will turn yellow with the COM port number.
Step 5- Select all files you downloaded in step 1.
- Click the PDA button. Select the file which has CODE in its name
- Click the Phone button and select the file which has MODEM in its name
- Click on the CSC button and select the file which has CSC in its name
- Click the PIT button and select the .pit file. Ignore this step if this file doesn’t exist
Step 6- In ODIN select Auto Reboot and F. Reset Time options. Select repartition only if your selected the PIT file
Step 7- Click the start button. Installation process will take a few minutes. After that your phone will reboot with BHLPA Android 4.0.4 official firmware.
